Bear Whitetail Hunter Compound Bow

THE BEGINNING:

Bear Whitetail Hunter Compound Bow

Bear Archery is a manufacturer and marketer of bows and archery equipment located in Gainesville, Florida owned by Escalade Sports. The company was founded in 1933 as the Bear Products Company in Detroit by Fred Bear and Charles Piper. The initial focus was on silk-screening and advertising support work for automotive companies.

In 1938 Fred Bear hired Nels Grumley, a woodworker and bowyer, and the company expanded to offer hand-made bows.

Fred Bear sold the advertising side of the Bear Products Company in 1940. The archery business was named Bear Archery.

Fred Bear sold the company to Victor Comptometer in 1968, but remained the president of Bear Archery. Bear Archery was not one of the first compound bow manufacturers, but eventually found success with early models like the Whitetail Hunter.

In 2003 Escalade Sports acquired the North American Archery Group and currently does business as Bear Archery Inc.

THE WHITETAIL HUNTER:

If you were setting up the ultimate whitetail bow, what would it look like? Here, we will give you the brief information on whitetail compound hunters bow manufactured by BEAR ARCHERY.

FEATURES

Bear’s whitetail hunter compound bow is a very versatile bow that is mostly liked and used by the hunters because of its attractive features. Here, we are going to highlight some of the salient features of this remarkable bow. It will definitely help you out while making its selection!

 THE PERFECT BOW

Quiet,  accurate, and forgiving. These are the most important aspects of a whitetail bow hunting setup.

Whitetails are North America’s most popular game, but manufacturers continue producing bows not entirely suited to the playing field. Ultra-fast, super-short bows dominate the market. But speed is overrated, especially in a whitetail context. Short bows are more difficult to shoot consistently when under pressure.

Whitetails rattle most of the hunter like nothing else. The day can accelerate from absolute inactivity into a serious killing mode in a finger snap. This is the reason why the hunters consider it to offer for the highest degree of forgiveness possible when gearing up for whitetails. Fast and short often translate to unforgiving.

This points out the middle ground compromises that combine 32- to 36-inch axle-to-axle lengths with a 7.5- to 8-inch brace height and a silky-smooth draw cycle (that eliminates radical speed cams). Bows this “long” are less prone to accuracy-robbing torque.

A high brace adds forgiveness (the arrow spends less time on the string) and is generally quieter. A smooth draw cycle is easier on cold, stiff muscles. Usually, the hunters also drop their standard draw weight of 70 to 75 pounds to 60 or 65 for whitetails.

THE PERFECT SIGHT

Five or more pins are fun on the range, but a three-pin sight is a plenty for most deer hunters.

Shot opportunities materialize quickly in whitetail hunting, often at the edges of legal shooting hours. At the moment of truth, you don’t want any confusion over which pin to choose, or any difficulty seeing pins while aiming. Three pins are really all you need: 20, 30 and 40 yards – about as far as any of us should be shooting. In thicker vegetation, a single pin, sighted for 25 yards, sees you through nearly all likely shot scenarios.

Whitetails move best during the low-light minutes, making bright, fiber-optic-backed pins a godsend. Look for models with spooled, aperture-wrapped or extended fibers for the brightest aiming points possible.

Savvy bow hunters also choose large peeps (1/4-inch) used in conjunction with round pin guards. Aligning extra-large-diameter peeps around circular, bright-accented pin guard apertures – instead of centering single pins in a smaller peep – allows repeatable accuracy in the dimmest settings.

THE PERFECT REST

Rests have changed rapidly. In recent years, there were two schools of thought regarding arrow rests: total capture or drop-away. The first offers ultimate control but less forgiveness following release due to tip-to-nock arrow contact. The second offers unsurpassed accuracy through complete fletching clearance (the arrow also spends 25 to 50 percent less time in contact with the bow), but less security while waiting and drawing on the game.

That debate was shattered with new classes of capture/fall-away arrow rests that accomplish both tasks in a single design. They hold arrows securely at ready while waiting and drawing but disappear upon release, providing the accuracy benefits of drop-away designs.

 THE PERFECT ARROW

Shots happen fast in the deer woods, often while you’re cold and sitting. Lowering your draw weight back to 60 or 65 pounds can be smart. Blazing arrow speed isn’t

As important as silence and forgiveness in the whitetail woods. The speed freak sometimes forgets that a “slow” arrow today is still much faster than we were shooting just five years ago. Bow design aside, speed is boosted by shooting lighter finished arrows. Lighter arrows are noisier and less stable in flight.

Shot noise equals string jumping. Sound travels at about 1,128 fps; a fast hunting arrow might reach 325 fps. Shooting even 350 fps doesn’t translate into beating a whitetail deer to the jump. The trick is to give deer nothing to react to.

PERFECT ARROW

Heavier arrows (10 to 12 grains per inch) absorb bow energy more efficiently, penetrate deeper after accidental bone hits and are much quieter after release. Remember, too, whitetails often live in brushy areas, and heavy arrows better stay the course after contacting light twigs or leaves than lighter ones.

Also pertinent to arrow efficiency is broadhead weight. Placing a heavier head up front (a 125-grain instead of 100) adds additional weight for silence, but also boosts front-of-center (FOC) balance, creating a more stable arrow following a sloppy release, and an arrow less prone to deflection following contact with obstacles. This means bumping FOC to 12 to 14 percent instead of “standard” single-digit percentiles.

In regards to broadheads, while mechanical designs provide easy flight tuning and often wider blood trails, there are tradeoffs. Most deployable blades require additional energy to ensure ample penetration and wide cutting diameters (more than 1.5 inches). Steeper attack angles might require additional push to assure pass-through penetration. Two holes are always better than one, especially when shooting from elevated positions. In general terms, choose broadheads based on delivered energy: cut-on-contact for draw weights less than 50 pounds and draw lengths less than 27 inches; fixed-blade heads with 1 3/16-inch cutting diameters for average 60- to 65-pound draw weights and draw lengths more than 27 inches; and efficient mechanical designs for draw weights more than 70 pounds.

 COMPLETE SILENCE

No bow is even remotely fast enough to beat a whitetail’s string-jumping reflexes. Rather than obsess with speed, deer hunters should obsess with noise (or lack of it).

Compound bows become quieter every year. Yet in whitetail hunting there’s no such thing as too quiet. Even if your bow came out of the box equipped with silencing gear, it doesn’t hurt to add more. Aftermarket anti-vibration/silencing gear works wonders on squelching annoying hums and buzzes produced by add-on accessories or particular parts of your bow. Also consider an active stabilizer, a product designed to suck unwanted vibrations from any compound while also lending balance. Of course, no bow is whitetail ready without adhesive-backed arrow-shelf padding and string silencers (even if it includes string bumpers/suppressors).

While bow hunting whitetails we rarely shoot far, but we do need to shoot well under sometimes excruciating pressure, accompanied by stiff muscles from cold and inactivity. Whitetails are also tightly wound, requiring the quietest bows possible. Meeting these demands isn’t difficult, but it can sometimes mean bucking established conventions.

 ABOUT THIS PRODUCT

o   PRODUCT INFORMATION

Stepping softly through the falling leaves, following a trail that leads to that trophy whitetail deer, and the excitement is palpable. At 50-inches from tip to tip, the Bear Whitetail Hunter compound bow offers a 20-inch draw length, and it offers three unique settings to change the bow weight. The 39-inch string length makes standard changeovers simple, and the sights offer three adjustable pins. Hunting with the Bear Whitetail Hunter compound bow means stretching the limits of endurance, and the epoxy resin body is thermal bound to hold up to years of outdoor punishment no matter what the weather.

o   PRODUCT IDENTIFIERS

  • Brand

Bear

  • Model

Whitetail Hunter

  • Properties
  • Dexterity
  • Right Hand

All of these, really prove the product reliable and good to get your food!

AVAILABILITY

After we have highlighted the remarkable and efficient qualities of the Bear’s whitetail compound bow, let’s move on towards the price and availability.

It costs $747.99 in new condition and $75 in pre-owned. It is finely available at: Ebay

PUBLIC’S VIEW

Fine old school bow.

Nice and light to carry. Smooth finger bow. Great for fishing, hunting or targets.

Great bow for and oldie

This is an older bow but still great. I use it mainly for target practice but have confidence that it could also still take down a deer (I plan and making an effort to do this next season). One drawback is that it doesn’t have an adjustable draw so if you get one it has to be a match to your draw. With the draw being permanent set it also makes for the limbs being rather large. The overall length of mine it 50″, which is large compared to modern bows. Overall, for a bow that is over 30 years old, it still displays a great deal of power and precision. If you are looking for a good older bow that can still perform this one fits the bill.

I like it and you should too.

This bow was bought to replace one that I owned for many years but got stolen. The Bear Whitetail Hunter is certainly not on par with the comfort and performance of modern compound bows, but for those like me who can’t spend $500+ for a bow but still want a good bow then the Whitetail Hunter fits the bill. Across the board, they are responsible for filling many many freezers with lots and lots of meat over the decades.

FINAL WORDS

You have given a brief package of information regarding the BEAR’S WHITETAIL COMPOUND HUNTERS BOW. After having deep and keen information regarding the product it will be quite easy for you to judge it for yourself.

Now, all you have to do is get this masterpiece from the easiest source and get into the woods this season to catch your food and have a nice time enjoying your beloved archery.

Leave a Comment